waffling60 - Bakeneko/Kei alternative PCB (60% MX)
Waffling60 is a well tested tray mount design based of the GH60. Daughter board placement is compatible with the Bakeneko (both Cannonkeys-variant and the open source variant) and Kei. This PCB will not fit a tray mount case, it's not recommended for the Unikorn R2. The 10U support is for 10U spacebars using 8U or 7U stabilizers.
The Unikorn R2 uses a different placement for the daughter board connector. Read Singas note regarding compatibility here: Link
- QMK & VIA main repos
- APM32F072 16bit MCU
- 1 qt SK6812 Mini-E below capslock switch as RGB indicator LED.
- Open sourced with C-OHL S
- Color: Black
- 1.6mm Thickness
- SMD rotary encoder support at split backspace position (furthest right)
- 16 qt underglow LEDs
PCB is delivered tested and pre-flashed with VIA support enabled.
For use with Kei, daughter board connector is placed closer on this PCB (due to Bakeneko compatibility). We include a very thin JST-cable that is better suited for building this PCB in a Kei.
For use with the Bakeneko, there is a compatible plate here: Link
A-stock vs B-stock:
I offer these PCBs in A-stock and B-stock. B-stock PCBs is PCBs that is functionally working properly, but has flaws. This can be imperfections in how it's milled out (the PCB outline), scratches on soldermask, slight damage to JST-connector etc. I like these PCBs to still come to use and not become junk. So I offer them up here for cheap. I hope you will see this as a bargain and to prevent waste.
Loads of compatibility, works great for my open source custom board.
good pcb work with ciel